VQ Model - F8F Rare Bear EP/GP 30cc Size ARF

Manufacturer: VQ Model Product Code: VQA135RB


F8F Rare Bear EP/GP 30cc Size ARF - 2m Wingspan

Out of
stock
$1,090.00
Dispatch
Out of Stock
In-Stock Alert
We'll email you when it's in stock

The Bearcat that became Rare Bear was a severely damaged wreck when discovered by Lyle Shelton in 1969. It had been abandoned next to a runway in Valparaiso, Indiana after it crashed there from a throttle-on torque roll in 1962. The airplane had been stripped by parts hunters, so Shelton found a fuselage, wing center section, landing gear and a right wing panel, but little else. Shelton bought the wreck and had the pieces trucked to Orange County and restoration began. One of the major modifications made during the rebuild involved installing a more powerful Wright R-3350 (from a Douglas Skyraider) in place of the Pratt&Whitney R-800 engine that is standard for a Bearcat. A Douglas DC-7 propeller and cowl were used and Shelton bought the landing gear fairings and doors from the wreck of Bob Kucera's Bearcat. Bill Fornoff loaned him a left wing panel and Gunter Balz supplied a rudder. The windshield and canopy were supplied by Edward T. Maloney. The rebuild was finished with the first flight on 13 September 1969.

Now, VQ introduces the F8F Rare Bear 30cc EP-GP with big battery hatch for easy to change the battery. Aluminium wing joiner with 2 piece wing for easy transport. This F8F Rare Bear is designed with the scale gear door that can be opened-closed by servo.

Great detail: Thanks to the large cowling fits even a ZG45 engine, only the exhaust pipes are down below.

Option with Electric retracts (E-retracts) and struts. It make this F8F Rare Bear one of the best Balsa scale warbird 30cc size in the market.

NOTE: $30 FREIGHT APPLIES TO THIS PRODUCT AND MAY REQUIRE PICK-UP FROM THE LOCAL PBT DEPOT DEPENDING ON YOUR ADDRESS

Features:
- All Balsa and lite-ply construction
- Fully covered in weathered detail
- Fiberglass cowling
- Reinstalled painted pilot
- Control surfaces pre-hinged and installed
- Two piece wing with 2x Aluminium Wing Joiner
Gear door open-close by servo

 Specifications:
- Wingspan:  2020mm (79.53in)
- Fuselage Lenght:  1590mm (62.6in)
- Weight (Ready to Fly): 7.8-8.1kg (17.2-17.86lbs)
- Engine:  2T 35-40cc 40 - / 4T 40cc
- Radio: 9 channels with 9 standard heavy duty servos
- Cowling Inner Diameter: 215 mm (8.46in)
   (fit perfect with Zenoah G-38 )
- Aluminium Spinner Diameter:  128-130mm (5in)
  ( not included )

 Includes:
- Assembly instructions with stage photos
- Tail wheel assembly
- Fiberglass cowling
- Fiberglass painted pilot
- Fuel tank for Gasoline
- Wheels and wheel covers
- 2x Aluminium wing joiner
- Decals and all hardware

Option: (not included)
- E-Retracts with struts: VQ-ARE24S
- Aluminium Spinner: 5’’


Does not include: radio, motor, glue, and silicon fuel line